
Endless Surf is the wave technology behind our lagoon at The Point Surf Park in Fellsmere, Florida. We run an ES36 system, which uses air-powered chambers called caissons along the back wall of the lagoon to create programmable waves.
That means we can change wave height, direction, frequency, and style instead of depending on natural swell. We’re also the first Endless Surf lagoon in the United States, which brings this technology to Florida surfers in a park built for surfing.
What matters to you isn’t the machinery. It’s what the machinery makes possible: wave settings for every ability level, repeatable waves for progression, and several ways to set up the lagoon for each kind of session.
What Is Endless Surf?
Endless Surf is a programmable surf-pool system from WhiteWater, a company with roughly four decades of wave-making experience. Unlike a recreational wave pool built mainly for swimming, it’s designed specifically to produce rideable surf.
The system pairs pneumatic wave generation with software that controls each wave-making chamber. Change the timing and sequence of those chambers, and you change the wave’s shape and direction. According to WhiteWater, the caissons are fully programmable, so operators can dial in wave height, frequency, direction and style on demand.
For surfers, all that engineering boils down to something simple: a wave set up around your session, instead of waiting for the ocean to cooperate.
Where Else Does Endless Surf Run?
Endless Surf already powers surf parks overseas, including O2 SURFTOWN MUC in Munich, Germany, and a park in Saudi Arabia. Surfers who know the technology from those parks can now ride it in the United States, here in Fellsmere.
How Do Pneumatic Caissons Make Waves?
Endless Surf makes waves by moving air through a row of chambers, called pneumatic caissons, along the back of the lagoon. Think of each caisson as its own wave-making chamber. Instead of a giant paddle moving through the surf area, air pressure inside the caissons pushes the water. Fire several caissons in a programmed sequence, and that push becomes a traveling wave.
The timing is everything. Firing different caissons in different patterns changes how the wave forms and moves through the basin. So the control goes well beyond “small” or “big”: the system can change the wave’s direction, shape, and frequency, and how each part of the lagoon is used during a session.
Air Chambers Along the Back Wall Push the Water
When air is sent into a chosen caisson, it displaces the water in front of it. Coordinate that across many chambers, and you get a wave. It’s less like one giant machine shoving the whole lagoon and more like a row of controllable wave-makers working together.
Because the sequence can change, the same lagoon can deliver very different sessions. A first-timer doesn’t need the same wave as someone working on high-performance turns, and the settings handle that difference.
Why Is There No Wave Machinery in the Surf Area?
In a pneumatic system, the moving parts that make the waves sit outside the surf area, behind the back wall. That keeps the water you surf in clear of large wave-making machinery and makes maintenance simpler for us. As a surfer, you never see any of it. You just see the wave, while the air system, caisson timing, and software do their work behind it.
What Does “ES36” Mean?
The number is the caisson count: an ES36 uses 36 pneumatic caissons. Endless Surf names its systems this way, with models ranging from ES36 to ES60.
More caissons mean a bigger lagoon footprint and longer potential rides, but not a better wave. WhiteWater says caisson count changes footprint and ride time, not the quality or capability of the wave itself. Our ES36 lagoon is roughly 700 feet long, which gives us room for separate surf zones and several operating setups while keeping every programmable feature of an Endless Surf wave.
What Wave Modes Run at The Point?
We run three operating modes, each using the basin in a different way:
- Split Peak: two peaks at once, so the lagoon runs more than one surf zone and spreads waves across the session.
- Full Peak: one wave across the full basin, for sessions where a longer, continuous ride is the priority.
- Scaled Peak: a main peak plus a smaller learning zone, so the setup can match who’s surfing.
By changing how the caissons fire, the system can also shape the wave itself: A-frame peaks that break both left and right, or a longer pointbreak-style line in one direction. That flexibility is the big difference between a programmable surf lagoon and a pool that just pushes out the same swell. The wave you ride depends on the session, mode and level you book, and you can see the basin diagram for each mode when you choose your surf level.
How Does One Lagoon Serve Beginners and Experts?
Because the wave is programmable. Our progression runs from the Caroline Marks Surf Academy through Beginner, Intermediate, Advanced, Expert and Pro, and each step adds intensity, speed, power and skill.
A Beginner needs a forgiving wave that gives them time to stand up and find control. An Advanced or Expert surfer needs speed and a more demanding section to build power, link turns and push maneuvers. Sending both onto one fixed wave wouldn’t work for either, so we match every session to ability, and beginners and advanced surfers never share a wave setting. Instead of asking every surfer to adapt to one wave, we set the wave for the surfer.
How Long Are the Rides?
Ride length depends on the system size, the operating mode, the wave setting, and which part of the lagoon you’re surfing. Bigger Endless Surf systems produce longer rides because they have more caissons and a larger footprint, and different modes on our ES36 give different ride lengths.
Length is only part of the story, though. For progression, repeatability matters just as much. If you’re working on a bottom turn, you benefit from hitting a similar section again and again. An experienced surfer chasing performance maneuvers may care more about a specific wave shape than about the longest possible ride.
Why Endless Surf in Florida?
Florida surfers know natural surf is inconsistent: good stretches when the swell lines up, then long spells with almost nothing to ride. A pneumatic lagoon changes that, because the wave comes from the park, not from an offshore storm. That lets us schedule sessions for every level without waiting on the Atlantic.
Consistency also helps you learn. Miss a wave, and you can adjust and try again on a near-identical one, instead of hoping the next ocean wave has the same size, shape and section. Experienced surfers get deliberate practice; beginners get a more predictable path.
That doesn’t make the ocean irrelevant. Ocean surfing still demands reading changing peaks, currents, tides, wind and crowds. For a wider look at the different wave technologies used across the industry, see how a surf wave pool works.
Frequently Asked Questions
How Big Can Endless Surf Waves Get?
WhiteWater lists Endless Surf waves of up to about 7 feet (2.1 meters). The waves you ride with us depend on our ES36 setup, the operating mode, your session, and your level. Book by the level descriptions rather than expecting the biggest wave the system can make.
Is Endless Surf the Same as Other Wave Pools?
No. Surf parks use different technologies to move water and make rideable waves. Endless Surf uses programmable pneumatic caissons along the back wall of its lagoon, while other systems use different mechanical or pneumatic approaches, lagoon shapes, and software. The waves can look similar from the beach even when the technology behind them is very different.
Can Beginners and Experts Surf at the Same Time?
Not on the same wave setting. We separate surfers by ability, from first-time instruction through Pro. Some operating modes use different areas of the lagoon at once, but you should always book the level that matches your real ability.
Where Else Can You Surf Endless Surf Waves?
Endless Surf runs at O2 SURFTOWN MUC in Munich, Germany, and at a park in Saudi Arabia, with more projects in development worldwide. Our lagoon in Fellsmere is the first in the United States.
Final Thoughts
Endless Surf turns our lagoon from a body of water into a programmable surf spot. Its 36 caissons move water with carefully timed bursts of air, and software decides how they work together, setting wave direction, frequency, height, style, and how the basin is laid out.
For you, the result is simpler than the engineering: a wave set up for the session you booked. Beginners work on basic control, intermediate surfers practice open-face surfing, and Advanced, Expert and Pro surfers step into more powerful, demanding settings. If you’re new to the whole idea, start with what a surf park is and how it brings consistent waves to Florida.
Curious how it feels in the water? See what other surfers say about us on Google.
Ride an Endless Surf Wave in Fellsmere
You don’t need to understand pneumatic engineering before you paddle out. You just need to pick the wave setting that fits your surfing today. Our ES36 lagoon gives Florida surfers a full path from first waves to high-performance sessions, all in one place.
Pick your level, book your session, and feel the technology for yourself. Have questions before you come? Plan your visit, and we’ll help you get ready.